WATERPROOF FEATURE OF THE COMPONENT
The fabric's resistance to water pressure is expressed in water column pressure (test based on the JIS 1092 standard).The higher the water pressure, the more waterproof the fabric. This clothing was validated in a shower test using 60 L/sqm/hr of water for 1 hour. This test reproduces the average conditions of a rain shower in the mountains.
Component with a 5,000 mm waterproof rating will therefore resists pressure exerted by 5,000 mm of water (which corresponds roughly to a 1-hour rainfall).
COMPONENT BREATHABILITY
Component breathability is measured by its thermal evaporative resistance (RET).
This is its capacity to let water vapour generated by the body during physical activity escape and therefore avoid water accumulating on the skin.
The lower the RET, the more breathable the fabric.
RET ≤ 6: very breathable fabric
RET ≤ 12: breathable fabric
RET ≤ 20: little or no breathability
COMPONENT DURABILITY
Resistance to wear and abrasion test: for example, we check that our fleeces do not pill using tests conducted in laboratories. Colour retention test: the colour fastness is verified to ensure that the colours do not bleed when coming into contact with saliva. Ageing test: repeated washing should not affect the fabric's properties, behaviour, thickness or appearance.
Product design: our expertise
Our Quechua global design centre is based in Passy, at the foot of Mont-Blanc in Haute Savoie. This location makes it a real meeting place for our teams (designers, product managers, engineers, etc) and outdoor sports enthusiasts. A great asset for designing your mountain walking products and providing you with all our expertise.
Care
1/ Machine wash (30 to 40°C): fasten hook and loop tabs and zips, use gentle detergent. Wash jackets and trousers inside out. Loosen straps and elastics. 2/ Avoid folding the garment too much in the washing machine: this can damage it. 3/ Do not mix clothing styles and colours.
4/ Do not use bleach or fabric softener
5/ Rinse thoroughly followed by a gentle spin cycle.
6/ Dry either on a washing line or in the drier (minimum temperature & duration)
WHERE DO OUR JACKETS COME FROM?
Created in our international design centre at the foot of the Mont Blanc in France, this fleece is then manufactured and assembled by our suppliers in China and Vietnam.
These are partners that have genuine expertise in making our tents and with whom we are in close collaboration.
Thanks to this relationship of trust with our industrial partners, we can create high-quality technical products.
